DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide Second Edition (February 2003) 651S1024T025 Printed In Taiwan RECYCLABLE
Table of Contents 0 ABOUT THIS GUIDE..............................................................................................................................IX OVERVIEW OF THIS USER’S GUIDE ...................................................................................................................... IX 1 INTRODUCTION....................................................................................................................................... 1 FAST ETHERNET TECHNOLOGY ...............
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide 0 A BOUT T HIS G UIDE This User’s Guide provides instruction for installing the Switch and making the proper connections to a Gigabit Ethernet network. Overview of this User’s Guide ♦ Chapter 1, “Introduction.” Describes the switch and its features. ♦ Chapter 2, “Unpacking and Setup.” Helps you get started with the basic installation of the switch. ♦ Chapter 3, “Identifying External Components.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide 1 1 I NTRODUCTION This section describes the features of the Switch, as well as giving some background information about Fast Ethernet, Gigabit Ethernet, and switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide Switching Technology Another key development pushing the limits of Ethernet technology is in the field of switching technology. A switch bridges Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or fast Ethernet LAN segments. Switching is a cost-effective way of increasing the total network capacity available to users on a local area network.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide Performance features ♦ IEEE802.3 compliant ♦ IEEE802.3u compliant ♦ IEEE802.3z compliant ♦ IEEE802.3ab compliant ♦ IEEE802.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide 2 2 U NPACKING AND S ETUP This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping carton of the switch and carefully unpack its contents.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide ♦ When installing the switch on a level surface, attach the rubber feet to the bottom of the device. The rubber feet cushion the switch, protect the casing from scratches and prevent it from scratching other surfaces. Desktop or Shelf Installation When installing the switch on a desktop or shelf, the rubber feet included with the switch should first be attached. Attach these cushioning feet on the bottom at each corner of the device.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide Figure 2-3. Switch in Rack Power on Plug one end of the AC power cord into the power connector of the switch and the other end into the local power source outlet. Power Failure As a precaution, in the event of a power failure, unplug the switch. When power is resumed, plug the switch back in.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide 3 3 I DENTIFYING E XTERNAL C OMPONENTS This chapter describes the front panel, rear panel, side panels, and LED indicators of the Switch. Front Panel The front panel of the DGS-1024T consists of an LED indicator for power and indicators for 24 individual ports for speed, full duplex, and link/activity. Figure 3-1. Front panel view of the DGS-1024T Rear Panel The rear panel contains the AC power connector and one system fan used to dissipate heat.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide Figure 3-3. Side panels (the right side panel is pictured on top) LED Indicators ♦ Power – This indicator lights when the Switch is turned on. ♦ Speed – There are three rows of indicators. The top LED is solid green for 1000 Mbps connections and solid amber for 100 Mbps connections. The indicator is off for 10 Mbps connections. ♦ FDX – This full-duplex indicator is located in the middle row. Solid green indicates a full-duplex connection.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide 4 4 C ONNECTING T HE S WITCH This chapter describes how to connect the Switch to your Gigabit Ethernet network. Switch to End Node End nodes include PCs outfitted with a 10, 100 or 10/100 Mbps RJ-45 Ethernet/Fast Ethernet Network Interface Card (NIC) and most routers. An end node can be connected to the Switch via a two-pair Category 3, 4, 5, or 5e UTP/STP cable—for optimal performance, Category 5e is recommended.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide Figure 4-2.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide 5 5 WARRANTY AND R EGISTRATION All countries and regions except USA Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide 17.Wenden Sie sich mit allen Fragen die Service und Repartur betreffen an Ihren Servicepartner. Somit stellen Sie die Betriebssicherheit des Gerätes sicher.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide Trademarks Copyright 2003 D-Link Corporation. Contents subject to change without prior notice. D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective proprietors.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide USA Only Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: ! ! D-Link or its authorized reseller or distributor and Products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, and U.S.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and software of D-Link's products, will not be applied to and does not cover any product purchased through the inventory clearance or liquidation sale or other sales in which DLink, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold "As-Is" without any warranty whatsoever i
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide ! ! Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Register your D-Link product online at http://support.dlink.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide A 6 T ECHNICAL S PECIFICATIONS General Standards: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3z 1000BASE-SX/LX Gigabit Fast Ethernet IEEE802.3ab 1000BASE-T IEEE 802.3x Flow Control ANSI/IEEE Std 802.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide Physical and Environmental AC input Power Consumption: 100 - 240 VAC, 50 - 60 Hz, 1.A Max, Internal universal power supply 75 watts maximum DC Fans: 1 built-in 75 x 75 x 30 mm fan Operating Temperature: 32 ° ~ 104 °F (0 ° ~ 40 °C) Storage Temperature: -13 ° ~ 131 °F (-25 ° ~ 55 °C) Humidity: 5% ~ 95% non-condensing Dimensions: 441mm x 309mm x 44mm (19” rack mount, 1U) Weight: 4.
DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide B 7 C ABLE L ENGTHS Use the following table to as a guide for the maximum cable lengths: Standard Mini—GBIC 1000BASE-SX Mini—GBIC 1000BASE-LX 1000BASE-T 100BASE-TX 10BASE-T Media Type 50/125µm Multimode Fiber 62.5/125µm Multimode Fiber 50/125µm Multimode Fiber 62.
Offices Australia D-Link Australasia 1 Giffnock Avenue, North Ryde, NSW 2113, Sydney, Australia TEL: 61-2-8899-1800 FAX: 61-2-8899-1868 TOLL FREE (Australia): 1800-177100 TOLL FREE (New Zealand): 0800-900900 URL: www.dlink.com.au E-MAIL: support@dlink.com.au & info@dlink.com.au Level 1, 434 St.
India D-Link India Plot No.5, Bandra-Kurla Complex Rd., Off Cst Rd., Santacruz (East), Mumbai, 400 098 India TEL: 91-022-652-6696/6578/6623 FAX: 91-022-652-8914/8476 URL: www.dlink-india.com, www.dlink.co.in & tushars@dlink-india.com E-MAIL: service@dlink.india.com Italy D-Link Mediterraneo Srl/D-Link Italia Via Nino Bonnet n. 6/B, 20154, Milano, Italy TEL: 39-02-2900-0676 FAX: 39-02-2900-1723 URL: www.dlink.it E-MAIL: info@dlink.
U.A.E. D-Link Middle East CHS Aptec (Dubai), P.O. Box 33550 Dubai U.A.E. TEL: 971-4-366-885 FAX: 971-4-355-941 E-MAIL: Wxavier@dlink-me.co U.K. D-Link Europe 4th Floor, Merit House, Edgware Road, Colindale, London NW9 5AB United Kingdom TEL: 44 (0) 20-8731-5555 FAX: 44 (0) 20-8731-5511 BBS: 44 (0) 181-235-5511 URL: www.dlink.co.uk E-MAIL: info@dlink.co.uk U.S.A. D-Link U.S.A.
