Datasheet

ManualsBrandsD-Link ManualsAutomationPoE Switch, Unmanaged, 1Gbps, 60W, RJ45 Ports 5, PoE Ports 4

5-Port Desktop Gigabit PoE+ Switch

DGS-1005P

The D-Link DGS-1005P 5-Port Desktop Gigabit PoE+ Switch enables you to connect Power

over Ethernet (PoE) devices such as wireless access points (APs), network video cameras and

IP phones to the network. Built with home and small business users in mind, the DGS-1005P is

compact and operates silently, making it ideal for most rooms and oces.

Power over Ethernet

The DGS-1005P features four Gigabit Ethernet ports that support the IEEE 802.3af and IEEE

802.3at PoE, supplying up to 30 W on each PoE port and providing a total power budget of 60

W. You can connect compatible devices to the DGS-1005P without using an additional power

supply. This allows you to save on cabling and to install devices in locations without immediate

access to power outlets.

High Performance

The DGS-1005P features plug-and-play installation and requires no conguration. Automatic

MDI/MDI-X support on all ports removes the need for crossover cables when connecting to

another switch or hub, and auto-negotiation on each port intelligently adjusts the port speed

for compatibility with the connected device. With wire-speed ltering and store-and-forward

switching, the DGS-1005P maximises network performance while minimising the transmission

of bad network packets.

Features

High-Speed Networking

• Five 10/100/1000 Mbps Gigabit Ethernet ports

• Full/half-duplex for Ethernet/Fast Ethernet and

full-duplex for Gigabit Ethernet speeds

Reliability

• IEEE 802.3x ow control

• Store-and-forward switching scheme

• RoHS-compliant

Easy Setup

• Plug-and-play installation

• Auto MDI/MDI-X crossover on all ports

Fanless and Silent

• Fanless design

• Noise-free operation

PoE Functionality

• Four PoE ports

• IEEE 802.3af/at compliant

• 60 W total power budget

• Up to 30 W power output per PoE port

Connect and Power with One Cable

Support for IEEE 802.3at Power over Ethernet

(PoE) on ports 1 to 4 allows for remote installation

and powering of PoE-powered devices

Enhanced PoE Power Budget

A large 60 W PoE power budget and up to 30 W

per port for simultaneously powering multiple

PoE-compatible devices

Plug-and-play

Plug-and-play installation means the switch can

be quickly and easily installed without the need

for any additional conguration

Product Highlights

Summary of content (3 pages)

PAGE 1
Product Highlights Connect and Power with One Cable Support for IEEE 802.
PAGE 2
DGS-1005P 5-Port Desktop Gigabit PoE+ Switch Green Technology The DGS-1005P features green technology such as IEEE 802.3az EnergyEfficient Ethernet (EEE), link status detection, and cable length detection. EEE adjusts the power consumption of the switch based on network utilisation, reducing the cost of ownership during periods of inactivity. Link status detection powers down ports when no links are detected, saving power when connected devices are shut down or disconnected.
PAGE 3
DGS-1005P 5-Port Desktop Gigabit PoE+ Switch Technical Specifications General Interfaces • 5 x 10/100/1000BASE-T ports Standards • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) • IEEE 802.3ab 1000BASE-T Gigabit Ethernet Media Interface Exchange • Auto MDI/MDI-X adjustment on all ports • IEEE 802.3x flow control • IEEE 802.1p QoS • ANSI/IEEE 802.