User's Manual

44D-Link DGL-4500 User Manual

Section 3 - Conﬁguration

Set the transmit power of the antennas.

Beacons are packets sent by an Access Point to

synchronize a wireless network. Specify a value.

100 is the default setting and is recommended.

This value should remain at its default setting of

2346. If inconsistent data ﬂow is a problem, only

a minor modiﬁcation should be made.

The fragmentation threshold, which is speciﬁed

in bytes, determines whether packets will be

fragmented. Packets exceeding the 2346 byte

setting will be fragmented before transmission.

2346 is the default setting.

(Delivery Trafﬁc Indication Message) 3 is the

default setting. A DTIM is a countdown informing

clients of the next window for listening to

broadcast and multicast messages.

This enables 802.11d operation. 802.11d is a wireless speciﬁcation developed to allow implementation of

wireless networks in

countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.

Note:Transmit power is regulated by international standards and users are forbidden to change its maximum limit.Regarding

the frequency of 802.11d, every country limits the frequency range used within its territory.Consumers are only allowed to

purchase products that operates with the country regulated frequency.

WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless

clients.

Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may

create higher data loss.

Check this box to enable WDS.

Transmit Power:

Beacon Period:

RTS Threshold:

Fragmentation

Threshold:

DTIM Interval:

802.11d:

WMM Function:

Short GI:

WDS Enable:

Advanced Wireless Settings