56K V.
D-Link DFM-560EL External Modem User’s Guide FCC Requirements This equipment complies with Part 68 of the FCC Rules. On the bottom of this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. IF REQUESTED. THIS INFORMATION MUST BE GIVEN TO THE TELEPHONE COMPANY.
D-Link DFM-560EL External Modem User’s Guide WARNING ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIONS COMPLIANCE LABEL WARNING FOR SAFETY REASONS, ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIOS COMPLIANCE LABEL. THIS INCLUDES CUSTOMER EQUIPMENT PREVIOUSLY LABELLED PERMITTED OR CERTIFIED. Modems connected to the Australian telecommunications network must be marked in accordance with the Labeling Notice. This modem has been specifically configured to ensure compliance with the ACA Standards.
D-Link DFM-560EL External Modem User’s Guide Table of Contents Chapter 1 Introduction .....................................................................................5 1.1 Introduction ............................................................................................................................... 5 1.2 What’s in the package............................................................................................................... 5 Chapter 2 Specifications..........................
D-Link DFM-560EL External Modem User’s Guide Chapter 1 Introduction 1.1 Introduction Thank you for selecting the 56K V.90 modem with IC+ chipset. This modem with IC+ chipset is a hardware modem that uses the state-of-the-art single chip and Silicon DAA design. Besides, it has the advantages of high quality, high reliability, more compact and low cost. This modem with IC+ chipset is compatible with current Windows 98, ME, NT 4.0, 2000,XP operation systems because of its independent OS.
D-Link DFM-560EL External Modem User’s Guide Chapter 2 Specifications Specifications: Chipset (Internal type) Line Connection Data Transmission Rate Fax Compatibility Error Correction Data Compression Command Set Communication Model DTE Speed (MAX) Transmit Level Flow Control Dialing Mode Auto Dial & Auto Answer Noted Features Telephone Interface Card Dimension Applicable PTT Approval Safety IC+ TP560x PSTN, 2 Wires ITU-T V.
D-Link DFM-560EL External Modem User’s Guide Chapter 3 Hardware Installation 1.Unplug the telephone from the wall socket, then plug the telephone into the socket on the back of the modem marked PHONE. 2.Plug the telephone cord supplied into the socket on the back of the modem marked LINE. 3.Plug the other end of the cord into the wall socket.
D-Link DFM-560EL External Modem User’s Guide Chapter 4 Software Installation The following sections explain how to install the modem drivers under Windows 98/ME/NT4.0/2000/XP. Refer to the section, which best suites, your operating system. 4.1 Windows 95 B (OSR2) 1. Please insert the driver CD supplied when you see the message of D-Link DFM-560EL External Modem appearing on the screen, then click Next to search for the driver. 2. Click Other Locations… to install from the installation disk.
D-Link DFM-560EL External Modem User’s Guide 3. Select the location of G: and click OK to continue. (G is the letter of CD-ROM drive). 4. Click Finish to end this installation procedure.
D-Link DFM-560EL External Modem User’s Guide 5. When you see the message of Wave Device for Voice Modem, then click Next to search the driver. 6. Click Other Locations… to install from the installation disk.
D-Link DFM-560EL External Modem User’s Guide 7. Select the location of G: and click OK to continue. (G is the letter of CD-ROM drive). 8. Click Finish to end this installation procedure.
D-Link DFM-560EL External Modem User’s Guide 4.2 Windows 98 1. Please insert the driver CD supplied when you see the message of D-Link DFM-560EL External Modem, then click Next to search for the driver. 2. Select the Search for the best driver for your device. [Recommended] and click Next to continue.
D-Link DFM-560EL External Modem User’s Guide 3. Select the CD-ROM drive and click Next to start the search. 4. Click Next to start the installation.
D-Link DFM-560EL External Modem User’s Guide 5. Click Finish to end this installation procedure. 6. When you see the message of Wave Device for Voice Modem, then click Next to search the driver.
D-Link DFM-560EL External Modem User’s Guide 7. Select the Search for the best driver for your device. [Recommended] and click Next to continue. 8. Select the CD-ROM drive and click Next to start the search.
D-Link DFM-560EL External Modem 9. Click Next to start the installation. 10. Click Finish to end this procedure.
D-Link DFM-560EL External Modem User’s Guide 4.3 Windows ME 1. Please insert the driver CD supplied when you see the message of D-Link DFM-560EL External Modem appearing., select Specify the location of the driver [Advanced] then click Next to search for the driver. 2. Select the Search for the best driver for your device. [Recommended], Specify a location and type in H:\ (H is the letter of the CD-ROM drive), then click Next to continue.
D-Link DFM-560EL External Modem User’s Guide 3. Click Next to start the installation. 4. Click Finish to end this installation procedure.
D-Link DFM-560EL External Modem User’s Guide 5. When you see the message of Wave Device for Voice Modem, select Specify the location of the driver [Advanced] then click Next to install the wave device. 6. Select the Search for the best driver for your device. [Recommended], Specify a location and type in H:\ (H is the letter of the CD-ROM drive), then click Next to continue.
D-Link DFM-560EL External Modem 7. Click Next to start the installation. 8. Click Finish to end this procedure.
D-Link DFM-560EL External Modem User’s Guide 4.4 Windows NT4.0 1. Please go to Start>My Computer\ Control Panel, then double-click on Modems icon to install a new modem.. 2. Select Don’t detect my modem; I will select it from a list, then click Next to continue.
D-Link DFM-560EL External Modem User’s Guide 3. Click Have Disk… to install from the installation disk. 4. Select the location of H: and click OK to continue. (H is the letter of CD-ROM drive).
D-Link DFM-560EL External Modem User’s Guide 5. Select D-Link DFM-560EL External Modem from the list of Models, then click Next to continue. 6. Select Selected ports and then select COM port that selected before. Click Next to start installing the selected modem.
D-Link DFM-560EL External Modem User’s Guide 7. Click Finish to complete the installation. 8. Click Close to end this procedure as you see the D-Link DFM-560EL External Modem. NOTE: If Remote Access Service (RAS) is installed on your computer, Windows NT will ask you to reconfigure Dial-Up Networking for the new Modem.
D-Link DFM-560EL External Modem 9. User’s Guide Move your cursor as following sequence Start\Settings\Control Panel and click Control Panel. Then double-click on the Network icon to configure the Dial-Up Networking.
D-Link DFM-560EL External Modem User’s Guide 10. Click on the Services tab and select Remote Access Service, then click Properties. If you can’t see Remote Access Service on the screen click Add to install Remote Access Service. 11. Click on the Add button to add modem. If there is any modem in the list, please click Remove first.
D-Link DFM-560EL External Modem User’s Guide 12. Select D-Link DFM-560EL External Modem , then click OK to confirm the settings. 13. Click Configure… to configure port usage. 14. Select Dial out only for Port Usage and click OK to confirm the settings.
D-Link DFM-560EL External Modem User’s Guide 15. Click Network… to configure the network. 16. Select TCP/IP lick OK to confirm the settings. 17. Click Continue to complete the setup. 18. Click Yes restart Windows NT.
D-Link DFM-560EL External Modem User’s Guide 19. After restarting your computer, please double-click on the My Computer icon on the desktop and double-click on the Dial-Up Networking icon. 20. If your phonebook is empty, please click OK to add an entry.
D-Link DFM-560EL External Modem User’s Guide 21. You may use the name provided or enter a different one, then click Next. 22. Select The non-Windows NT server I am calling…then click Next.
D-Link DFM-560EL External Modem User’s Guide 23. Enter the phone number of your local ISP and click Next. 24. Select Point-to-Point Protocol (PPP) and click Next.
D-Link DFM-560EL External Modem User’s Guide 25. Consult with your local ISP for the choice and click Next. 26. Enter your IP address if you have a fixed one or leave the value: 0.0.0.0, then click Next.
D-Link DFM-560EL External Modem User’s Guide 27. Enter the IP addresses of a DNS and/or WINS server for your local ISP or set 0.0.0.0 if you are not sure. Then click Next. 28. Click Finish.
D-Link DFM-560EL External Modem User’s Guide 29. Click on the More buttons and select Edit entry and modem properties. 30. Select D-Link DFM-560EL External Modem (COM3) from Dial using list and click on the Configure button..
D-Link DFM-560EL External Modem User’s Guide 31. Enable all the Hardware Features and select 115200 from Initial speed(bps) list, then click OK. 32. Click on the Server tab and enable three options of TCP/IP, Enable software compression and Enable PPP LCP extensions.
D-Link DFM-560EL External Modem User’s Guide 33. Click on the Security tab and enable the option: Accept any authentication including clear text, then click OK. 34. Click Dial to connect to.
D-Link DFM-560EL External Modem 35. User’s Guide Enter User name and Password and click OK, and the modem will dial out to your ISP and get a connection.
D-Link DFM-560EL External Modem User’s Guide 4.5 Windows 2000 1. Windows will detect the modem automatic, please insert the driver CD supplied and click Next. 2. Select Search for a suitable driver for my device [recommended], then click Next.
D-Link DFM-560EL External Modem User’s Guide 3. Select CD-ROM drives, then click Next. 4. Windows will found a driver for this device, then click Next.
D-Link DFM-560EL External Modem 5. Click Yes to continue. 6. Click Finish to end this procedure.
D-Link DFM-560EL External Modem User’s Guide 4.6 Windows XP 1. Please insert the driver CD supplied when you see the message of D-Link DFM-560EL External Modem , Select the Install from a list or specific location [Advanced] then click Next to search for the driver. 2. Select Include this location in the search: and type in H:\ (H is the letter of the CD-ROM drive) or use Browse to search, then click Next to continue.
D-Link DFM-560EL External Modem 3. Click Continue Anyway to continue. 4. Click Finish to end this procedure.
D-Link DFM-560EL External Modem User’s Guide Chapter 5 Diagnostics 5.1 Windows 95/98/ME 1. Please go to Start\ Settings\ Control Panel and double-click on the Modems icon. 2. To test the modem by clicking on the Diagnostics tab. Then select the COM Port where Topic Modem is setting and click on the More Info… button to start the test.
D-Link DFM-560EL External Modem 3. User’s Guide If your modem is responding to AT commands and functioning correctly, it means that your modem is working properly. Click OK to end this procedure.
D-Link DFM-560EL External Modem User’s Guide 5.2 Windows 2000 1. Move your cursor as following sequence Start\ Settings\ Control Panel and click Control Panel. Then double-click on the Phone and Modem Options icon. 2. Click Modems tab, then select D-Link DFM-560EL External Modem and click Properties.
D-Link DFM-560EL External Modem User’s Guide 3. Click Diagnostics tab, then click Query Modem. 4. If your modem is responding to AT commands and functioning correctly, it means that your modem is working properly. Click OK.
D-Link DFM-560EL External Modem User’s Guide 5.3 Windows XP 1. Move your cursor as following sequence Start\ Settings\ Control Panel. Click on the System icon.
D-Link DFM-560EL External Modem 2. User’s Guide Click Hardware tab and select the modem, then click Device Manager.
D-Link DFM-560EL External Modem User’s Guide 3. Click Modems tab and select the modem. Then double-click on the D-Link DFM-560EL External Modem. 4. Click Diagnostics tab, then click Query Modem.
D-Link DFM-560EL External Modem 5. User’s Guide If your modem is responding to AT commands and functioning correctly, it means that your modem is working properly. Click OK.
D-Link DFM-560EL External Modem User’s Guide Chapter 6 Uninstalling 6.1 Windows 95/98/ME 1. Please go to Start\ Settings\ Control Panel and double-click on the modems icon.
D-Link DFM-560EL External Modem User’s Guide 2. Select D-Link DFM-560EL External Modem. then click Remove. 3. Click Close.
D-Link DFM-560EL External Modem User’s Guide 6.2 Windows NT 4.0 1. Please go to Start\ My Computer\ Control Panel, then double-click on Modems icon to install a new modem. 2. Select D-Link DFM-560EL External Modem then click Remove.
D-Link DFM-560EL External Modem 3. Click Yes. 4. Click Close.
D-Link DFM-560EL External Modem User’s Guide 6.3 Windows 2000 1. Move your cursor as following sequence Start\ Settings\ Control Panel. Then double-click on the Add/Remove Hardware icon. 2. Click Next.
D-Link DFM-560EL External Modem User’s Guide 3. Select Uninstall\ Unplug a device, then click Next. 4.
D-Link DFM-560EL External Modem User’s Guide 5. Select D-Link DFM-560EL External Modem , then click Next to continue. 6. Select YES, I want to uninstall this device, then click Next to continue.
D-Link DFM-560EL External Modem 7. User’s Guide Click Finish to end this procedure.
D-Link DFM-560EL External Modem User’s Guide 6.4 Windows XP 1. Move your cursor as following sequence Start\ Settings\ Control Panel. Click on the System icon.
D-Link DFM-560EL External Modem 2. User’s Guide Click Hardware tab and select the modem, then click Device Manager.
D-Link DFM-560EL External Modem User’s Guide 3. Click Modems tab and select the modem. Then double-click on the D-Link DFM-560EL External Modem. 4. Click Driver tab, then click Uninstall.
D-Link DFM-560EL External Modem 5. User’s Guide Click OK to end this procedure.
D-Link DFM-560EL External Modem User’s Guide Chapter 7 Troubleshooting Modem will not dial-out z Check your phone cable connected properly into LINE jack. z If you use the Tone-dialing on a line, but required the Pulse-dialing method, please change the command T to P in your dial command line. Modem will not answer an incoming call z Check your phone cable connected properly into LINE jack. z By connect a Telephone to the PHONE jack.
D-Link DFM-560EL External Modem User’s Guide Chapter 8 Commands Most people use the communication software programs to tell modems what to do. Therefore, you may not use the commands in this chapter. However, if you prefer to communicate with your modem directly, you can type the commands described below. Here describes how to work in the terminal mode. 8.1 Typing Commands z Use the BACKSPACE key to delete typing errors.
D-Link DFM-560EL External Modem User’s Guide 8.2 AT Commands A &Cn Go off-hook and attempt to answer a call. Control Carrier Detect (CD) Signal &C0 &C1 CD override Normal CD operations Dn Dial 0-9 P T W DTMF digits 0 to 9 Pulse (rotary) dial Tone dial Wait for second dial tone &Dn &D0 &D1 &D2 DTR Option Ignore an on-to-off transition of DTR Switch to on-line command mode without disconnection Normal DTR operations.
D-Link DFM-560EL External Modem User’s Guide 8.3 S-Register Definitions Sr=n Set Register r to n Sr? Display contents of S-Register S0 Number of Rings to Auto-Answer The number of ring the modem waits for before it auto Answers. Range 0-255 (rings) Default 0 (Country dependent) S6 Wait Time before Blind Dialing The time to pause after off-hook before blind dialing.
D-Link DFM-560EL External Modem User’s Guide LIMITED WARRANTY D-Link provides this limited warranty for its product only to the person or entity who originally purchased the product from D-Link or its authorized reseller or distributor.
D-Link DFM-560EL External Modem User’s Guide What You Must Do For Warranty Service: Registration Card. The Registration Card provided at the back of this manual must be completed and returned to an Authorized D-Link Service Office for each D-Link product within ninety (90) days after the product is purchased and/or licensed. The addresses/telephone/fax list of the nearest Authorized D-Link Service Office is provided in the back of this manual.
D-Link DFM-560EL External Modem User’s Guide Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON,
D-Link DFM-560EL External Modem User’s Guide 13. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw. Elektrischen Schlag auslösen. 14. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen Sicherheit nur von authorisiertem Servicepersonal geöffnet werden. 15.
D-Link DFM-560EL External Modem User’s Guide CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures Warnung! Dies ist in Produkt der Klasse B. Im Wohnbereich kann dieses Produkt Funkstoerungen verursachen. In diesem Fall kann vom Benutzer verlangt werden, angemessene Massnahmen zu ergreifen. Advertencia de Marca de la CE Este es un producto de Clase B.