Datasheet

DFL-2560G
NETDEFEND UTM Firewall 2560G
- Network connections
6 x 10/100/1000BASE-TX WAN/LAN ports
for secure internal/external network connection
4 x SFP Ports for D-Link SFP Transceivers
-ICSA Labs Certified (Corporate Firewall Level/
IPSec VPN 1.2 Enhanced version)
-Proactive End-to End Security Solution (D-Link
ZoneDefenseTM Technology)
- Comes with 12 months of IPS and Anti- Virus
Subscription packages
-Firewall Plaintext Throughput: 2,000Mbps
(2Gbps)
-3DES/AES Throughput: 1,000Mbps (1Gbps)
-IPS (Intrusion Prevention) Throughput:
600Mbps
-Anti-Virus Throughput: 450Mbps
-concurrent Sessions: 1,500,000
-New session/second: 20,000
-Policies: 6,000
- Support Users: Unrestricted
-LCD Status monitor 20x2 Lines with Keypad
-Layer 3 mode: Route mode, NAT mode
-Layer 2 mode: Transparent mode
-IPSec Protocol: ESP
- IPSec Mode: Tunnel mode, Transport mode
- VPN Encryption Method:
DES/3DES/AES/Twofish/Blowfish/CAST-
128/NULL
- Site to Site VPN, Remote Access VPN for
IPSec
- Up to 5,000 dedicated VPN Tunnels (Shared
with IPSec, PPTP and L2TP)
- Priority-Bandwidth utilization
- Policy-Base Routing
- OSPF v2 Dynamic Routing Protocol
- Support Multiple WAN Link
- 2 USB 2.0 Ports (reserved for future use)
- For complete details of the Software Features
please see the product specification
Important Note
- The maximum Firewall plaintext throughput is
based on RFC2544 testing methodologies.
- VPN throughput is measured using UDP traffic
at 1420 byte packet size adhering to RFC 2544.
- IPS and Anti-Virus performance test is based
on HTTP protocol and 1Mbyte file attachment
run on the IXIA IxLoad. Testing done with
multiple flows through port pairs.
- Actual performance may vary depending on
network conditions and activated services.
5 years
Limited
Lifetime**
0
YES**