Installation guide

Identifying Components
2
The following illustrations show the front view, rear view,
LCD Panel and status LEDs of the DFL-M510.
2.1 Front View
1 2 3 4 5 6
1. See “LCD Panel” below
2. See”Status LEDs” below
3. LCD Navigation Buttons
4. WAN Port with hardwave bypass
5. LAN Port with hardwave bypass
6. Console Port
Note:
Hardware Bypass – A built-in failure-proof function of the
DFL-M510. In an unlikely event of a hardware failure or an
accidental power-off, your network trafc will automatically skip
(bypass) the DFL-M510 and ow normally as if a DFL-M510 was
not deployed on your network at all in the rst place.
*
*
04
*