Installation guide
3.2 Setting up with a firewall
If your network is behind a rewall, the DFL-M510 is
placed between rewall and LAN. Refer to the following:
Connect a UTP cable from the rewall to the WAN port on
the DFL-M510.
Connect a UTP cable from the LAN port on the DFL-M510 to
the LAN.
Note:
If you are deploying DFL-M510 over the VLAN (802.1q) network,
you have to congure the VLAN setting before putting in the
network. Please refer to the manual for detail conguration in
VLAN environment.
ADSL Router DFL-M510Firewall
WAN Port LAN Port
DFL-M510 Quick Installation Guide
09