Specifications

Using the Setup Wizard

A computer on your LAN1 must be assigned an IP address and Subnet Mask from the

same range as the IP address and Subnet Mask assigned to the DFL-900 in order to be

able to make an HTTPS connection using a web browser. The DFL-900 is assigned an

IP address of 192.168.1.254 with a Subnet Mask of 255.255.255.0 by default. The

computer that will be used to configure the DFL-900 must be assigned an IP address

between 192.168.1.1 and 192.168.1.253 with a Subnet Mask of 255.255.255.0 to be

able to connect to the DFL-900. This address range can be changed later. There are

instructions in the DFL-900 User’s Guide, if you do not know how to set the IP address

and Subnet Mask for your computer.

Step 1 － Login

Type “admin” in the account

field, “admin” in the Password

field and click Login.

Connect to https://192.168.1.254

Step 2 － Run Setup

Wizard

Click the Run Setup Wizard.

After login to https://192.168.1.254

BASIC SETUP > Wizard

Step 3 － System Name

Enter the Host Name and the

Domain Name, followed by

clicking the Next.

BASIC SETUP > Wizard