Specifications

3
Connecting the DFL-900
A. First, connect the power cord to the Power Socket at the back panel of
the DFL-900 and then plug the other end of the power adapter to a wall
outlet or power strip. The Power LED will turn ON to indicate proper
operation.
B. Using an Ethernet cable, insert one end of the cable to the WAN port
on the front panel of the DFL-900 and the other end of the cable to a
DSL / Cable modem or other internet access devices.
C. Computers with an Ethernet adapter can be directly connected to any
of the LAN ports using a cross-over Ethernet cable.
D. Computers that act as servers to provide Internet services should be
connected to the DMZ port using an Ethernet Cable.
A. Power Socket
D. DMZ1 Port
For connecting computers that
act as servers for Internet users
to access.
Console Port
For managing the
DFL-900 with CLI
commands.
B. WAN1 Port
For connecting the DFL-900 to a
DSL or Cable Modem supplied by
your ISP to access the Internet.
C. LAN1 Port
For connecting computers
and network devices to your
LAN.