Then, use the screws provided with the equipment rack to mount the firewall in the rack. About This Guide This guide contains step-by-step instructions for setting up the D-Link DFL-260E/860E Firewall. Please note that the model you have purchased may appear slightly different from those shown in the illustrations Unpacking the Product Open the shipping carton and carefully unpack its contents.
Plugging in the AC PowerCord Device Status LEDs and Ethernet Port LEDs Users may now connect the AC power cord into the rear of the firewall and to an electrical outlet (preferably one that is grounded and surge protected). The device LEDs show information about current device status. When the device is powered up, the POWER LED changes from off to solid green and the SYSTEM LED changes from off to solid green. Startup takes approximately one minute to complete.
3. Connect the computer that you will use to configure the DFL-260E/860E to the network hub or switch. DFL-260E/860E Default Interface Settings Port Interface Name Interface Type 1 WAN DHCP Client 0.0.0.0/0 Disable 2 DMZ Static IP 172.17.100.254/24 Disable 3 All LAN Port Static IP 192.168.10.1/24 Enable IP Address Web-Based Mgmt Note: The default management IP address of the DFL-260E/860E is 192.168.10.1.
Step 4 Using the WebUI Log into the NetDefend Firewall web interface. The default login information is: To use the WebUI, the workstation from which you are managing the device must initially be on the same subnetwork as the device. Browser Username: admin Password: admin Version Microsoft Internet Explorer 6.0 or higher Mozilla Firefox 1.0 or higher Netscape Navigator 8.0 or higher Figure 7. Authentication Message Table 4.
Additional Information To establish a console connection: In addition to the user manual, the Master CD also includes many device configuration examples. Additional help is available through D-Link worldwide offices listed in the appendix of the User Manual or online. To learn more about D-Link security product products, please visit the website http://security.dlink.com.tw. For support, please visit the website http://support.dlink.com.tw, which will redirect you to your regional D-Link website. 1.
NOTES
Ver. 1.
