User manual

3. Click OK
4. Go to Rules > IP Rules > Add > IPRule
5. Now enter:
• Name: HTTP-WAN-to-DMZ
• Action: SAT
• Service: http
• Source Interface: wan
• Destination Interface: dmz
• Source Network: all-nets
• Destination Network: wan_ip
• Translate: Select Destination IP
• New IP Address: 10.1.4.10
6. Click OK
7. Go to Rules > IP Rules > Add > IPRule
8. Now enter:
• Name: HTTP-WAN-to-DMZ
• Action: Allow
• Service: http
• Source Interface: wan
• Destination Interface: dmz
• Source Network: all-nets
• Destination Network: wan_ip
9. Click OK
4.6.6. Transparent Mode Scenarios Chapter 4. Routing
125