Specifications

Adding a PPTP Client

Step 1. Select VPN > PPTP Client.

! User name: Specify the PPTP client. This should be unique.

! Password: Specify the PPTP client password.

Server Address: Enter the PPTP Server’s IP address.

Remote Server:

Single Machine:

Check to connect to single computer.

Multi-Machine:

Check to allow multiple computers connected

to the PPTP server.

IP Address: Enter the PPTP Client IP address.

Netmask:

Enter the PPTP Client Sub net mask.

! Auto-Connect when sending packet through

the link: Check to enable the auto-connection

whenever there’s packet to transmit over the

connection.

! Auto-Disconnect if idle … minutes: Configure

this device to disconnect to the PPTP Server

when there is no activity for a predetermined

period of time. To keep the line always connected,

set the number to 0.

! Schedule: Click the down arrow to select the

schedule, which was pre-determined in Schedule.

Refer to the corresponding section for details.

Click OK to save modifications or click Cancel to cancel modifications.