Specifications

86
Modifying PPTP Server Design
Step 1. Select VPN > PPTP Server.
Step 2. Click Modify after the Client IP Range.
Step 3. In the Modify Server Design Window, enter appropriate settings.
Disable PPTP- Check to disable PPTP Server.
Enable PPTP- Check to enable PPTP Server.
1.
Encyption: the default is set to disabled.
2. Client IP Range Enter the IP range allocated for PPTP
Client to connect to the PPTP server.
Auto-Disconnect if idle … minutes- Configure this device
to disconnect to the PPTP Server when there is no activity for
a predetermined period of time. To keep the line always
connected, set the number to 0.
Schedule- Click the down arrow to select the schedule,
which was pre-determined in Schedule. Refer to the
corresponding section for details
.
Step 4. Click OK to save modifications or click Cancel to cancel modifica-
tions
!
!
!
!