Specifications

Incoming

This chapter describes steps to create policies for packets and services from

the External (WAN) network to the Internal (LAN) network including Mapped IP

and Virtual Server.

Enter Incoming window:

Step 1: Click Incoming under the Policy menu to enter the Incoming window.

The Incoming table will display current defined policies from the External

(WAN) network to assigned Mapped IP or Virtual Server.

Step 2: The fields of the Incoming window are:

! Source: Source networks which are specified in the

External section of the Address menu, or all the external

network addresses.

! Destination: Destination networks, which are IP

Mapping addresses or Virtual server network addresses

created in Virtual Server menu.

! Service: Services supported by Virtual Servers (or

Mapped IP).

! Action: Control actions to permit or deny packets from

external networks to Virtual Server/Mapped IP travelling

through the DFL-80.

! Option: Specify the monitoring functions on packets from

external networks to Virtual Server/Mapped IP travelling

through the Firewall.

! Configure: Modify settings or remove incoming policy.

! Move: This sets the priority of the policies, number 1

being the highest priority.