Specifications

Interface

In this section, the Administrator can set up the IP addresses for home or

office network. The Administrator may configure the IP addresses of the

Internal (LAN) network, the External (WAN) network, and the DMZ network.

The netmask and gateway IP addresses are also configured in this section.

Entering the Interface menu:

Click on Configuration in the left menu bar. Then click on Interface below

it. The current settings of the interface addresses will appear on the screen.

Configuring the Interface Settings:

Internal Interface

Using the Internal Interface, the Administrator sets up the Internal (LAN)

network. The Internal network will use a private IP scheme. The private IP

network will not be routable on the Internet.

IP Address: The private IP address of the Firewall’s internal network is the IP

address of the Internal (LAN) ports of the DFL-80. The default IP address is

192.168.1.1.