User manual

Show the object again to verify the new property value:

gw-world:/> show Service ServiceTCPUDP telnet

Property Value

----------------- -------

Name: telnet

DestinationPorts: 23

Type: TCP

SourcePorts: 0-65535

SYNRelay: No

PassICMPReturn: No

ALG: (none)

MaxSessions: 1000

Comments: Modified Comment

Web Interface

1. Go to Objects > Services

2. Click on the telnet hyperlink in the list

3. In the Comments textbox, enter your new comment

4. Click OK

Verify that the new comment has been updated in the list.

Important: Configuration changes must be activated

Changes to a configuration object will not be applied to a running system until the new

NetDefendOS configuration is activated.

Example 2.6. Adding a Configuration Object

This example shows how to add a new IP4Address object, here creating the IP address 192.168.10.10, to the

Address Book.

CLI

gw-world:/> add Address IP4Address myhost Address=192.168.10.10

Show the new object:

gw-world:/> show Address IP4Address myhost

Property Value

--------------------- -------------

Name: myhost

Address: 192.168.10.10

UserAuthGroups: (none)

NoDefinedCredentials: No

Comments: (none)

Web Interface

1. Go to Objects > Address Book

2. Click on the Add button

3. In the dropdown menu displayed, select IP Address

4. In the Name text box, enter myhost

5. Enter 192.168.10.10 in the IP Address textbox

2.1.9. Working with Configurations Chapter 2. Management and Maintenance