User Manual

4. Click OK
5. Repeat the above to create an object called server2 for the 192.168.1.11 IP address.
B. Create a Group which contains the 2 webserver objects:
1. Go to Objects > Address Book > Add > IP4 Group
2. Enter a suitable name, eg. server_group
3. Add server1 and server2 to the group
4. Click OK
C. Specify the SLB_SAT IP rule:
1. Go to Rules > IP Rule Sets > main > Add > IP Rule
2. Enter:
• Name: Web_SLB
• Action: SLB_SAT
• Service: HTTP
• Source Interface: any
• Source Network: all-nets
• Destination Interface: core
• Destination Network: ip_ext
3. Select tab SAT SLB
4. Under Server Addresses add server_group to Selected
5. Click OK
D. Specify a matching NAT IP rule for internal clients:
1. Go to Rules > IP Rule Sets > main > Add > IP Rule
2. Enter:
• Name: Web_SLB_NAT
• Action: NAT
• Service: HTTP
• Source Interface: lan
• Source Network: lannet
• Destination Interface: core
• Destination Network: ip_ext
3. Click OK
E. Specify an ALLOW IP rule for the external clients:
1. Go to Rules > IP Rule Sets > main > Add > IP Rule
2. Enter:
• Name: Web_SLB_ALW
• Action: ALLOW
10.3.6. SLB_SAT Rules Chapter 10. Traffic Management
286