Installation guide

2.4 Default Interface Attribute Definition
Note:
For security reason, default only allow LAN1 interface (192.168.1.1)
that can login into firewall GUI from Web browser. You also can
modify this configuration after login into firewall GUI. About the
detail set up procedure, please refer to the user’s manual.
DFL-2500 Quick Installation Guide
05
2.3 LED Indicators
Wording on
Front plate
Default name
in firewall
Default
interface type
definition
Default interface
IP Address
Default
DHCP Status
1 WAN1 Static IP 192.168.110.254/24 Disable
2 WAN2 Static IP 192.168.120.254/24 Disable
3 WAN3 Static IP 192.168.130.254/24 Disable
4 WAN4 Static IP 192.168.140.254/24 Disable
5 DMZ Static IP 172.17.100.254/24 Disable
6 LAN1 Static IP 192.168.1.1/24 Disable
7 LAN2 Static IP 192.168.2.1/24 Disable
8 LAN3 Static IP 192.168.3.1/24 Disable
Status
Solid green
Light off
Solid green
Light off
Blinking green
Light off
Solid Green
Blinking Green
Light off
Solid green
Solid orange
Description
The device is powered on.
The device is powered off.
System is operating properly.
The device is not working.
System is defective, such firmware
upgrade fail.
No link
Link present
Port is sending or receiving data.
Port is operating at 10Mbps.
Port is operating at 100Mbps.
Port is operating at 1000Mbps.
Color
Green
Green
Green
Green/
Orange
LED
Power
System
Phone Jack LED
light (right)
Phone Jack LED
light (left)