User manual
• Enable Proxy ARP on the int interface.
• As in L2TP, enable the insertion of new routes automatically into the main routing table.
3. Define a User Authentication Rule, this is almost identical to L2TP:
Agent Auth Source Src Network Interface Client Source IP
PPP Local all-nets pptp_tunnel all-nets (0.0.0.0/0)
4. Now set up the IP rules in the IP rule set:
Action Src Interface Src Network Dest Interface Dest Network Service
Allow pptp_tunnel pptp_pool any int_net All
NAT pptp_tunnel pptp_pool ext all-nets All
As described for L2TP, the NAT rule lets the clients access the public Internet via the D-Link
Firewall.
5. Set up the client. For Windows XP, the procedure is exactly as described for L2TP above but
without entering the pre-shared key.
9.2.7. PPTP Roaming Clients Chapter 9. VPN
331