User manual

Interfaces: Select lan and dmz
3. Click OK
Configure the routing:
1. Go to Routing > Main Routing Table > Add > SwitchRoute
2. Now enter:
Switched Interfaces: TransparentGroup
Network: 10.0.0.0/24
Metric: 0
3. Click OK
Configure the rules:
1. Go to Rules > IP Rules > Add > IPRule
2. Now enter:
Name: HTTP-LAN-to-DMZ
Action: Allow
Service: http
Source Interface: lan
Destination Interface: dmz
Source Network: 10.0.0.0/24
Destination Network: 10.1.4.10
3. Click OK
4. Go to Rules > IP Rules > Add > IPRule
5. Now enter:
Name: HTTP-WAN-to-DMZ
Action: SAT
Service: http
Source Interface: wan
Destination Interface: dmz
Source Network: all-nets
Destination Network: wan_ip
Translate: Select Destination IP
New IP Address: 10.1.4.10
6. Click OK
7. Go to Rules > IP Rules > Add > IPRule
8. Now enter:
Name: HTTP-WAN-to-DMZ
Action: Allow
Service: http
Source Interface: wan
4.7.3. Transparent Mode Scenarios Chapter 4. Routing
176