User manual

For a custom protocol it is necessary to specify if the protocol uses TCP or UDP connections or

both and to specify the port number the protocol will try and connect to at the other end of the

connection.

Specifying a Schedule

A named Schedule can be defined through the Firewall > Schedules menu option and this can then

be used with any individual protocol allowed for outgoing traffic from the LAN interface.

Schedules specify a period of time when a particular selection is valid. For example, the

administrator might decide to not allow web surfing during working hours. The HTTP and HTTPS

protocols could then have the appropriate schedule associated with them to achieve this.

More details can be found in Section 4.9, “Schedules”.

4.1. Outbound LAN Traffic Options Chapter 4. The Firewall Menu