User manual

Appendix C. Apple Mac IP Setup
An Apple Mac can be used as the management workstation for setup of a DFL-160. Usually
configuration of the IP address of the MAC's chosen Ethernet interface should not be needed since
the DFL-160 automatically assigns the address using DHCP. If DHCP cannot be used, the
workstation IP address should be configured manually. The steps to do this with MacOS X are as
follows:
1. Go to the Apple Menu and select System Preferences.
2. Click on Network.
3. Select Ethernet from the left sidebar menu.
4. Select Manually in the Configure pull down menu.
116