User manual

Proxy ARP on :
Local IP : (use iface IP in ARP queries)
Metric : 0
Flags :
Rules
Shows the contents of the Rules configuration section.
Syntax: rules [<options>] [<range>]
Options:
-schedule - Filter out rules that are not currently allowed by selected schedules.
-type - Type of rules to display.
-verbose - show all parameters of the rules.
The range parameter specifies which rules to include in the output of this command.
Settings
Shows the contents of the Settings configuration section.
Syntax: settings
Shows available groups of settings.
Example:
DFL-160:/> sett
Available categories in the Settings section:
IP - IP (Internet Protocol) Settings
TCP - TCP (Transmission Control Protocol) Settings
ICMP - ICMP (Internet Control Message Protocol) Settings
ARP - ARP (Address Resolution Protocol) Settings
State - Stateful Inspection Settings
ConnTimeouts - Default Connection timeouts
LengthLim - Default Length limits on Sub-IP Protocols
Frag - Fragmentation Settings
VLAN - VLAN Settings
SNMP - SNMP Settings
DHCP - DHCP (Dynamic Host Configuration Protocol) Settings
Log - Log Settings
Misc - Miscellaneous Settings
Syntax: settings <group_name>
Shows the settings of the specified group.
Example:
DFL-160:/> settings arp
ARP (Address Resolution Protocol) Settings
ARPMatchEnetSender : DropLog
ARPQueryNoSenderIP : DropLog
ARPSenderIP : Validate
UnsolicitedARPReplies : DropLog
ARPRequests : Drop
ARPChanges : AcceptLog
StaticARPChanges : DropLog
ARPExpire : 900
Rules Appendix A. CLI Reference
109