User manual

55D-Link DAP-1360 User Manual
Section 3 - Conguration
PPTP
Choose PPTP (Point-to-Point Tunneling Protocol) if your ISP uses a PPTP connection. Your ISP will provide you with a username and
password. This option is typically used for DSL services.
PPTP IP Address:
Enter the IP address (Static PPTP only).
PPTP Subnet Mask:
Enter the subnet mask.
PPTP Server IP
Address:
Enter the Server IP Address provided by
your ISP.
Password:
Enter your PPTP password and then
retype the password in the next box.
MTU Size:
Y o u m a y n e e d t o c h a n g e t h e M T U
(Maximum Transmission Unit) for optimal
performance with your specific ISP. The
default MTU size is 1400.
Attain DNS
automatically:
Select this option if you want the DAP-1360
get DNS server IP address automatically.
Primary/ Secondary
DNS Server:
Enter the Primary and Secondary DNS (Domain Name System) server IP address assigned by your ISP.
Clone MAC address:
The default MAC address is set to the MAC address on the AP (Access Point). You can click the Clone Your
PC's MAC Address button to replace the AP's MAC address with the MAC address of your Ethernet card. It is not
recommended that you change the default MAC address unless required by your ISP.
Username:
Enter your PPTP account name.
Select this option if you want to manually
enter the DNS Server IP address(es).
Fields to enter the Primary and Secondary
DNS server IP addresses will appear after
you select this option.
Set DNS Manually: