User manual
52D-Link DAP-1360 User Manual
Section 3 - Conguration
WAN Settings
WAN settings are only used in the WISP Client Router wireless mode and the WISP Repeater wireless mode. Choose Dynamic
IP(DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP number
to use. This option is commonly used for Cable modem services.
Dynamic IP (DHCP)
The Host Name is optional but may be
required by some ISPs.
Host Name:
Y o u m a y n e e d t o c h a n g e t h e M T U
(Maximum Transmission Unit) for optimal
performance with your specific ISP. The
default MTU size is 1500.
MTU Size:
Select this option if you want the DAP-1360
to get the DNS (Domain Name System)
server IP address automatically.
Attain DNS
automatically:
Select this option if you want to manually
enter the DNS Server IP address(es). The
elds to enter the Primary and Secondary
DNS server IP addresses will appear after
you have selected this option.
Set DNS manually:
Enter the Primary and Secondary DNS server IP address assigned by your ISP.
Primary/ Secondary
DNS Server:
The default MAC address is set to the Ethernet MAC address your DAP-1360. You can click the Clone Your PC's
MAC Address button to replace the AP's MAC address with the MAC address of the PC that you used to register with
your ISP. It is not recommended that you change the default MAC address unless required by your ISP.
Clone MAC address: