User manual
47D-Link DAP-1360 User Manual
Section 3 - Conguration
Repeater
The Wireless Repeater mode extends the wireless coverage of another wireless AP or wireless router.
Enable Wireless:
Site Survey:
Wireless Network
Name (also called
the SSID):
Wireless Channel:
802.11 Mode:
Channel Width:
Transmission Rate:
Enable Hidden
Wireless:
Wireless Security
Mode:
Wi-Fi Protected
Setup:
Select this to turn the Wi-Fi module on and off. Use the drop-down box to select if you want to use a schedule. Click Add
New to add or change a schedule.
Click this button to choose the root AP from an
available connection list.
The Wireless Network Name is a unique name
that identies a network. All devices on a network
must share the same wireless network name
in order to communicate on the network. If you
decide to change the wireless network name
from the default setting, enter your new wireless
network name in this eld.
The channel will follow the root AP. The channel
used will be displayed.
Select the appropriate 802.11 mode based on
the wireless clients in your network. The drop-
down menu options are 802.11g Only, Mixed
802.11b/g, 802.11b Only, 802.11n Only, or
Mixed 802.11b/g/n.
Select the appropriate channel width between 20MHz or Auto 20/40MHz from the pull-down menu.
Select the transmission rate. It is strongly suggested to use the Auto setting for optimal performance.
Check the box if you do not want the SSID to be broadcast by the DAP-1360. This prevents the SSID from being seen
by site survey utilities, so any wireless clients will have to be pre-congured with the SSID of the DAP-1360 in order to
connect to it.
Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See P.75, Wireless Security, of this manual
for a detailed explanation of the wireless security options.
Select enable if you want to congure 1360 with WPS.