Specifications

69
config snmp system_location
Purpose Used to enter a description of the location
of the switch.
Syntax config snmp system_location
<sw_location>
Description This command is used to enter a
description of the location of the switch.
Parameters
<sw_location> − a description of the
location of the switch. A maximum of 128
characters can be used.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To configure the switch location for “Taiwan”:
.
DES7000:4@#config snmp system_location Taiwan
Command: config snmp system_location Taiwan
Success.
DES7000:4@#