Specifications

68
config snmp system_name
Purpose Used to configure a name for the switch.
Syntax config snmp system_name <sw_name>
Description This command is used to give the switch an
alpha-numeric name of up to 128
characters.
Parameters
<sw_name> − an alpha-numeric name for
the switch of up to 128 characters.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To configure the switch name for “DES7100”:
.
DES7000:4@#config snmp system_name DES7100
Command: config snmp system_name DES7100
Success.
DES7000:4@#