Specifications

67
config snmp trap_receiver
Purpose Used to configure a specified trap receiver.
Syntax config snmp trap_receiver <ipaddr>
<community_string>
Description This command is used to configure a
specified trap receiver.
Parameters
<ipaddr> − the IP address of a
management station that will receive SNMP
traps generated by the switch’s SNMP
agent.
<community_string> − An alpha-numeric
string of up to 32 characters that will be
used to authenticate management stations
that want to receive SNMP traps from the
swtich’s SNMP agent.
Restrictions Only administrator-level users can issue
this command. A maximum of 3 trap
receivers is allowed.
Example Usage:
To configure a trap receiver 10.1.1.1 in read-only level SNMP
community:
DES7000:4@#config snmp trap_receiver 10.1.1.1 System
Command: config snmp trap_receiver 10.1.1.1 System
Success.
DES7000:4@#