Specifications

delete snmp trap_receiver

Purpose Used to delete a trap receiver entry on the

switch made using create snmp

trap_reciever above.

Syntax delete snmp trap_reciever <ipaddr>

Description The command allows the user to delete an

SNMP trap receiver specified previously

using the create trap_receiver command

above.

Parameters

<ipaddr> − the IP address of the

management station that is currently

specified to receive traps from the switch’s

SNMP agent. This management station will

be deleted from the list of up to three that

can be entered using the create snmp

trap_receiver commmand above.

Restrictions Only administrator-level users can issue

this command.

Example Usage:

To delete a trap receiver 10.1.1.1:

DES7000:4@#delete snmp trap_receiver 10.1.1.1

Command: delete snmp trap_receiver 10.1.1.1

Success.

DES7000:4@#