Specifications

148
create link_aggregation group_id
Purpose Used to create a link aggregation group on
the switch.
Syntax create link_aggregation group_id <value>
Description This command will create a link
aggregation group.
Parameters
<value> − Specifies the group id. The
switch allows up to 626 link aggregation
groups to be configured. The group
number identifies each of the groups.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To create link aggregation group:
DES7000:4@#create link_aggregation group_id 1
Command: create link_aggregation group_id 1
Success.
DES7000:4@#