Specifications

144
config 802.1q port
Purpose Used to setup IEEE 802.1Q port based
VLANs.
Syntax config 802.1q port [<portlist>/all]
[ingress_checking
<enabled/disabled>/acceptable_frame
<tagged_only/admit_all>]
Description Use this to configure port based VLANs.
Ports can be tagged or untagged, and
ingress filtering can be enabled or disabled
for the listed ports. Set acceptable frame
type to accept only tagged frames or to
admit all frames.
Parameters <portlist> - Port or ports that are being
configured for 802.1Q VLANs.
ingress_checking – Enable or disable
ingress checking (ingress filtering) on the
listed ports.
acceptable_frame – Frames are tagged
<tagged_only> or untagged <admit_all>
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To configure port based VLANs for ports 6:1 to 6:6: