Datasheet

D-Link Systems, Inc. 17595 Mt. Herrmann Street Fountain Valley CA 92708 www.dlink.com ©Copyright D-Link Systems, Inc. 2004. All rights reserved. D-Link® is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their
respective manufacturers or owners. Visit www.dlink.com for more details.
Hardware
Port Standard/Funtion Support
Fully Compliant with IEEE 802.3/802.3u/802.3ab/802.3z Standard
ANSI/IEEE 802.3 NWay auto-negotiation
MDI/MDI-X Auto-detection
IEEE 802.3x Flow Control in Full-duplex, Back Pressure in Half-duplex
DES-6500 Chassis System
Number of User-configurable Slots: 8
2 Redundant Power Supply Bays
Backplane Switch Fabric Bandwidth: 160Gbps
Up to 96Gigabit Ethenet Ports
Up to 192 Fast Ethernet Ports
3k IP Address, 16K MAC address, 4K VLAN (max.)
8 Hardware Priority Queues
32 Trunking Group, 8 port/Group
RAM Buffer: 128MB per Line Card, 256MB of CPU card
DES-6502 CPU/Fabric Switching Module
RS-232 Console Port (DB9) : DCE, 115200, N, 8, 1
Reset, Alarm Off Buttons
System, Power LED
160 Gbps Switching Capacity
Up to 142 Mpps Forwarding Rate Support
256MB SDRAM
512KB for Boot code and 16 MB for Runtime code
DES-6507 12-port 10/100/1000Base-T + 2SFP Combo Module
Fully Compliant with IEEE 802.3/802.3u/802.3ab/802.3z Standard
ANSI/IEEE 802.3 NWay auto-negotiation
MDI/MDI-X Auto-detection
IEEE 802.3x Flow Control in Full-duplex
Copper Cables:
10BASE-T:
2-pair UTP CAT 3,4, 5 (100m max)
EIA/TIA-568 100-ohm STP (100m max.)
100BASE-TX/1000BASE-T:
2-pair or 4 pair UTP CAT 5 or Better (100m max.)
EIA/TIA-568 100-ohm STP (100m max.)
Fiber Cables: 50, 62.5/125 Micron Multimode Fiber, 9 Micron Singlemode Fiber
LED report (per port):
Link/Act
DES-6509 12-port 1000Base-X SFP Fiber Module
Fully Compliant with IEEE 802.3z Standard
IEEE 802.3x Flow Control in Full-duplex
Fiber Cables: 50, 62.5/125 Micron Multimode Fiber, 9 Micron Singlemode Fiber
LED report (per port):
Link/Act
DES-6500
Technical Specifications
DES-6511 Redundant Power Supply
Two Power Modules Design
Full Redundant Feature Design
Hot-swappable Power Source
Power Management Function Enabled
Removable Handle Design
Input: 90 ~ 264 VAC, 47 ~ 63 Hz
Output: 3.3V:4A ~ 80 A; 12V: 0.1A ~2A
Network Cable
10Base-T:
2-pair UTP CAT 3,4, 5
EIA/TIA-568 100-ohm STP
100Base-TX/1000Base-T:
2-pair or 4 pair UTP CAT 5 or Better
EIA/TIA-568 100-ohm STP
1000Base-SX:
50, 62.5/125 Micron Multimode Fiber
1000Base-LX:
50, 62.5/125 Micron Multimode Fiber
9 Micron Singlemode Fiber