User`s guide

Fast Ethernet Switching System User’s Guide
Managing the DES-5200
85
Create New Trunking Port
The Create New Trunking Port panel, displayed in Figure 47, is used to create
Trunk Ports. You can create up to seven trunking groups with up to eight ports in
each group. Each Trunking Group acts like a single port. The trunking speed is
800 Mbps in half duplex and 1.6 gigabits in full duplex. Trunk group1 has been
created as an example. Your screen may look different.
Figure 47: Create New Trunking Port
New Trunking Group Name
Is the name of the Trunking Group you are going to create. All Trunking Groups
must have a name.
Port #
Is the number of the port. The numbers on the panel match the ports on the DES-
5200.
Name
This field identifies the TrunkGroup that the port has been assigned to. The field
is open if the port has not been assigned to a TrunkGroup.
Status