User`s guide

Fast Ethernet Switching System User’s Guide
Web Management
117
A confirmation panel is shown when the settings are changed. See Figure 68.
Figure 68: Switch Port Configuration Confirmation
Port
Indicates the number of the port being configured.
State
All ports have two states: enabled or disabled. Enabled ports transmit and receive
data packets. Disabled ports can not transmit or receive packets. You can disable
ports. However, you will not be able to use a disabled port.
Physical
Refers to the physical state of the port. If you manually change the state of a port
it will remain in that state until you change it. It will not auto negotiate speed and
duplex mode. All TX ports can be in the following physical states:
• Auto
• 1000SX/Full
• 100TX/Half
• 100TX/Full
• 10T/Half
• 10T/Full