User`s guide

Fast Ethernet Switching System User’s Guide

Introduction

Full Size Modules

Table 2: DES-5200 Full Size Modules

Module Name Part Number Description

12 TX Module 0DES5200T.A2 12-Port 10/100-TX module

8 FX Module 0DES5200F.A2 8-Port 100BASE-FX

module

CPU Module 0DES5200I.A2 CPU Module

Back Plane* 1ES5200B..A1 (PCBA) Back Plane

* Note: Back Plane refers to the internal back plane of all models of the DES-

5200 series. It is not visible or accessible without opening the case. All

modifications and repairs to the back plane must be done by D-Link Systems, Inc.

or authorized repair facilities. Do not open the case. Opening the case can cause

injury and/or damage. If there is a problem with the modules or the back plane,

contact D-Link System, Inc. Technical Support for assistance.

Optional Modules

The optional modules are half size modules. The half size modules work in slots 3

and 4 of the chassis. The following optional modules are available:

• The DES-5005T is a 2-Port TX module.

• The DES-5005 is a 2-Port FX module.

• The DES-5008 is a 1-Port gigabit module.

Table 3: DES-5200 Optional Modules

Module Part Number Description

DES-5005T DES5005T..A1 2-Port 10/100-TX module

DES-5005 DDES5005..A2 2-Port 100BASE-FX module

DES-5008 DDES5008..A2 1-Port 1000BASE-SX gigabit module

Power Plug

The three pronged power plug is located at the front of the DES-5200. The switch

will work with AC in the range 100-240 VAC, 50-60 Hz. The power requirements

are indicated on the rear panel of the DES-5200.