User manual

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
274
Figure 13- 4. Reboot window
Save Changes
The Switch has two levels of memory; normal RAM and non-volatile or NV-RAM. Configuration
changes are made effective by clicking the Apply button. When this is done, the settings will be
immediately applied to the switching software in RAM, and will immediately take effect.
Some settings, though, require you to restart the Switch before they will take effect. Restarting the
Switch erases all settings in RAM and reloads the stored settings from the NV-RAM. Thus, it is
necessary to save all setting changes to NV-RAM before rebooting the Switch.
To retain any configuration changes permanently, click the Save Changes link. The following
window will appear:
Figure 13- 5. Save Configuration window
Click the Save Configuration button to save the current switch configuration in NV-RAM. Use the
radio button to select Only save config, Only save log, or Only save config. The following dialog
box will confirm that the configuration has been saved: