User manual

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch

193

Figure 10- 27. CPU Interface Filtering Rule Configuration – IP

Configure the following Access Rule Configuration settings for IP:

Parameter Description

Profile ID

This is the identifier number for this profile set.

Mode

Select Permit to specify that the packets that match the access profile are forwarded by

the Switch, according to any additional rule added (see below).

Select Deny to specify that packets that do not match the access profile are not

forwarded by the Switch and will be filtered.

Access ID

Type in a unique identifier number for this access. This value can be set from 1 - 100.

Type

Selected profile based on Ethernet (MAC Address), IP address or Packet Content.

• Ethernet instructs the Switch to examine the layer 2 part of each packet

header.

• IP instructs the Switch to examine the IP address in each frame's header.

• Packet Content Mask instructs the Switch to examine the packet header.

Priority (0-7)

This parameter is specified if you want to re-write the 802.1p default priority previously

set in the Switch, which is used to determine the CoS

ueue to which

ackets are