User manual

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
104
address for an IP interface on the switch. For this example, we have chosen the next IP address above
the network address for the IP interface’s IP Address:
VLAN Name VID Network Number IP Address
System (default) 1 10.32.0.0 10.32.0.1
Engineer 2 10.64.0.0 10.64.0.1
Marketing 3 10.96.0.0 10.96.0.1
Finance 4 10.128.0.0 10.128.0.1
Sales 5 10.160.0.0 10.160.0.1
Backbone 6 10.192.0.0 10.192.0.1
Table 8- 2. VLAN Example - Assigned IP Interfaces
The six IP interfaces, each with an IP address (listed in the table above), and a subnet mask of
255.224.0.0 can be entered into the Setup IP Interface window.
To setup IP Interfaces on the Switch:
Go to the Configuration folder, and click on the Layer 3 IP Networking folder, and then click on the
IP Interfaces Table link to open the following dialog box:
Figure 8- 1. IP Interface Table window
To setup a new IP interface, click the Add button. To edit an existing IP Interface entry, click on an
entry under the Interface Name heading. Both actions will result in the same screen to configure, as
shown below.
Figure 8- 2. IP Interface Settings – Add