User manual

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
96
Priority
Enter a value between 0 and 240 to set the priority for the port interface. A higher
priority will designate the interface to forward packets first. A lower number denotes a
higher priority.
Click Apply to implement changes made.
STP Instance Settings
The following window displays MSTIs currently set on the Switch. To view the following table, click
Layer 2 Features > Spanning Tree > STP Instance Settings:
Figure 7- 27. STP Instance Table window
The following information is displayed:
Parameter Description
Instance Type
Displays the instance type(s) currently configured on the Switch. Each instance type
is classified by a MSTI ID. CIST refers to the default MSTI configuration set on the
Switch.
Instance Status
Displays the current status of the corresponding MSTI ID
Instance Priority
Displays the priority of the corresponding MSTI ID. The lowest priority will be the root
bridge.
Click Apply to implement changes made.
Click the Modify button to change the priority of the MSTI. This will open the Instance ID Settings
window to configure.
Figure 7- 28. STP Instance Settings Modify window
Parameter Description