Specifications

•
10/100 Mbps Ethernet
- Auto-Negotiating
-
10/100 Selectable
- Full Duplex or Half Duplex Data
• Auto Network Detection MDI/MDI-X
• Distances up to 45 km (28 miles)
•
NTCIP Compatible
•
Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Multimode and Singlemode Versions Available
• ST Optical Connectors Standard
• No In-field Electrical or Optical Adjustments Required
• Power, Transmit and Receive Data Status LED Indicators
• Hot-Swappable Rack Modules
• IEEE 802.3 Compliant
• Comprehensive Lifetime Warranty
10/100 Mbps ETHERNET OPTICAL TRANSCEIVER
D7100 SERIES
FEATURES
• 10/100 Mbps Ethernet
• High Speed Computer Links
APPLICATION EXAMPLES
DESCRIPTION
The IFS D7100 Series ethernet transceiver is designed to transmit
and receive 10 or 100 Mbps data over multimode or singlemode
fiber. The IFS D7100 Series will function as a 10 Mbps Ethernet
link, or as a 100 Mbps Ethernet link without any adjustments. The
D7100 Series is environmentally hardened to operate in extreme
temperatures. Status indicating LED’s for power and data type are
present at the RJ-45 connector and at the fiber optic transceiver end.
Plug-and-play design ensures ease of installation requiring no
electrical or optical adjustments. The modules are available in
either stand-alone or rack mount versions.
ORDERING INFORMATION
PART
NUMBER
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
SINGLEMODE
9/125µm
MULTIMODE
62.5/125
µ
m**
2
1
1
PS-12VDC 12
Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’
to Model Number for R3 Rack Mount (Requires R3 Rack purchased separately)
Add ‘-C’
for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
D7120
D7120WDMA
❖
D7120WDMB
D7130WDMA
❖
D7130WDMB
FIBERS
REQUIRED
10 dB
15 dB
3 miles (5 km)
28 miles (45 km)
DESCRIPTION
10/100 Mbps Ethernet (1310 nm)
10/100 Mbps Ethernet (1310/1550 nm)
10/100 Mbps Ethernet (1550/1310 nm)
10/100 Mbps Ethernet (1310/1550 nm)
10/100 Mbps Ethernet (1550/1310 nm)
PRODUCT SPECIFICATION
D
* Optical transmission distance is limited to optical loss of the fiber
and any additional loss intr
oduced by connectors, splices and patch panels.
Distance can also be limited by fiber
bandwidth. **For
50/125 Fiber
, subtract 4 dB fr
om Optical Power
Budget.
❖
WDMA
must mate with a
WDMB.
♦
♦
All accessories are third party manufactured.
ACCESSORIES
♦
♦
OPTIONS
.comwww.
Available at:
Available at:
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
Inter
national Fiber Systems, Incorporated
■ DESIGN CENTER (888) 999-9IFS or [phone]
F
AX [phone]
■ [e-mail] ■ For an of
fice near you go to: www
.ifs.com
With Offices in Asia Pacific ■ Australia ■ Europe ■ Latin America
10 dB 1.2 miles (2 km)