Specifications

• 12VDC or 24VDC selectable output.
• 6 amp supply current.
• Input 115VAC / 60Hz, 1.9 amp.
• Input fuse rated @ 3.5 amp/250V.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid
or gel type batteries.
• Maximum charge cur
rent .7 amp.
• Automatic switch over to stand-by battery when
AC fails (zero voltage drop).
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators.
• Enclosure:
- Combination knockouts are 1/2" and 3/4"
- Accommodates up to two (2) 12VDC/7AH batteries.
• Product weight:
- AL600ULX: 7.6 lbs.
- AL600ULXR: 6.6 lbs.
• Shipping w
eight:
- AL600ULX: 8.5 lbs.
- AL600ULXR: 7.6 lbs.
AL600ULX(R) Power Supply/Charger
Rev. DSAL600ULX - F07G
Overview
Agency Approvals
Specifications
AL600ULX
• Grey enclosure.
AL600ULXR
• Red enclosure.
• These multi-agency approved single output power supply/chargers convert a
115VAC/60Hz input into one (1) 12VDC or 24VDC
non-power limited output.
UL 294 UL Listed for Access Control
System Units.
UL 603
UL Listed Standard for Power
Supplies for Use with Burglar-
Alarm Systems.
UL 1069 UL Listed Hospital Signaling and
Nurse Call Equipment.
UL 1481
UL Listed Standard for Safety for
F
ire Protecti
v
e Signaling Systems.
CUL Listed - CSA Standard C22.2
No.205-M1983, Signal Equipment.
MEA - NYC Department of
Buildings Approved.
CSFM -
California State Fire
Marshal Approved.
FM - Factory Mutual Approved.