Specifications

AL400ULX(R) Power Supply/Chargers
R
ev. DSAL400ULX - F06G
Overview
Specifications
AL400ULX
• Grey enclosure.
AL400ULXR
• Red enclosure.
• These multi-agency approved single output power supply/chargers convert a
115VAC/60Hz input into one (1) Class 2 Rated 12VDC or 24VDC power
limited output.
• 12VDC or 24VDC selectable output.
• 12VDC @ 4 amp or 24VDC @ 3 amp supply current.
• Class 2 Rated power limited output.
• Input 115VAC / 60Hz, 1.45 amp.
• Input fuse rated @ 3.5 amp/250V
.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid
or gel type batteries.
• Maximum charge current .7 amp.
• Automatic switch over to stand-by battery when
AC fails (zero voltage drop).
• AC fail supervision (for
m "C" contacts).
• Low battery supervision (form "C" contacts).
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators.
• Enclosure:
- Combination knockouts are 1/2” and 3/4”
- Accommodates up to two (2) 12VDC/7AH batteries.
• Product weight:
- AL400ULX: 7.3 lbs.
- AL400ULXR: 6.3 lbs.
• Shipping weight:
- AL400ULX: 8.2 lbs.
- AL400ULXR: 7.3 lbs.
Agency Approvals
UL 294
UL Listed for Access Control
System Units.
UL 603 UL Listed Standard for Power
Supplies for Use with Bur
glar-
Alarm Systems.
UL 1069 UL Listed Hospital Signaling and
Nurse Call Equipment.
UL 1481
UL Listed Standard for Safety for
Fire Protective Signaling Systems.
CUL Listed - CSA Standard C22.2
No.205-M1983, Signal Equipment.
MEA - NYC Department of
Buildings Approved.
CSFM - California State Fire
Marshal Approved.
FM - Factory Mutual Approved.