Specifications

4 Configuration DES-1210 Series Switch Web UI Reference Guide
ARP+IP Inspection: When the ARP+IP inspection function is enabled, all IP packets are checked.
The legal IP packets are forwarded, while the illegal IP packets are dropped.
DHCP Snooping: By enable DHCP Snooping, the switch will snoop the packets sent from DHCP Server and
clients, and update information to the White List.
Click Apply to make configurations make effects.
Security > Smart Binding > Smart Binding
The Smart Binding Settings page allows the user to create Static Smart Binding entries on the Switch.
Figure 4.89 – Security > Smart Binding > Smart Binding
The Manual Binding Settings contains the following fields:
IP Address: Specifies the IP address to bind to the MAC address set below.
MAC Address: Specifies the MAC address to bind to the IP address set above.
Port: Specify the switch ports for which to configure this IP-MAC binding entry (IP Address + MAC Address).
Click Add to add a new entry.
Auto Scan: Specifies to scan connected devices in a range of IP address.
IP Address From/To: Specifies the range of IP Address to scan all devices in the network.
Click Scan and the search results will be listed in below table.
Binding: check the box to select desired binding devices.
Select All: to check the boxes of Binding for all found devices.
Clear All: to cancel the box of Binding.
Apply: click Apply to set Smart Binding entries.
Security > Smart Binding > White List
The White List displays the authorized clients set by Manual Binding Settings or Auto Scan Settings.
Figure 4.90 – Security > Smart Binding > White List
Select the check box of entry then click Delete to remove it.
Click Select All to select all entries of the table or click Clean to select none entries. Please keep at least
one management host in the White List.
62