Specifications

4 Configuration DES-1210 Series Switch Web UI Reference Guide

Figure 4.55 –L2 Functions > Multicast > IGMP Router port Settings

State : Specify the State to be enabled or disabled.

Querier State: D-Link Smart Switch is able to send out the IGMP Queries to check the status of multicast

clients. Default is disabled.

Fast Leave: Specify the Fast Leave feature to be enabled or disabled.

To view the Multicast Entry Table for a given VLAN, press the View button.

Figure 4.56 – L2 Functions > Multicast > IGMP Multicast Entry Table

Click Delete to remove a specified entry or click Delete All to remove all entries.

L2 Functions > Multicast > Multicast Forwarding

The Multicast Forwarding page displays all of the entries made into the Switch’s static multicast forwarding

table. To implement the Multicast Forwarding Settings, input VID, Multicast MAC Address and port settings,

then click Add.

Figure 4.57 – L2 Functions > Multicast > Multicast Forwarding

VID: The VLAN ID of the VLAN to which the corresponding MAC address belongs.

Multicast MAC Address: The MAC address of the static source of multicast packets. This must be a

multicast MAC address.