User manual

D-Link Web Smart Switch User Manual
Po
wer LED: The Power LED lights up when the Switch is connected to a power source.
Link/Act/Speed LED (Ports 1-24):
Flashing: Indicates a network link through the corresponding port.
Blinking: Indicates that the Switch is either sending or receiving data to the port.
Green: Indicates that the port is running at 100M.
Light off: Indicates that the port is running at 10M.
Reset: Press the reset button to reset the Switch back to the default settings. All previous changes will be
lost.
Rear Panel
Figure 3 – DES-1100-24 Rear Panel
Power: Connect the supplied AC power cable to this port.
DES-1100-26
24-Port 10/100Mpbs with 2-Port 10/100/1000Mbps Combo SFP Web Smart Switch
Front Panel
Figure 5 – DES-1100-26 Front Panel
Power LED: The Power LED lights up when the Switch is connected to a power source.
Link/Act/Speed LED (Ports 1-26):
Flashing: Indicates a network link through the corresponding port.
Blinking: Indicates that the Switch is either sending or receiving data to the port.
Speed LED Per 10/100 Mbps Port(Port1-Port24)
Green: Indicates that the port is running at 100M.
Light off: Indicates that the port is running at 10M.
Speed LED Per 10/100/1000 Mbps Port(Port25-Port26)
Green: Indicates that the port is running at 1000M
Amber: Indicates that the port is running at 10M/100M
CAUTION: The MiniGBIC ports should use UL
listed Optical Transceiver product, Rated
Laser Class I. 3.3Vdc.
Reset: By pressing the Reset button for 5 seconds the Switch will change back to the default configuration
and all changes will be lost.
3
3