User manual

D-Link Web Smart Switch User Manual

Figure 65 – QoS > Storm Control

Storm Control Type: User can select the different Storm type from Broadcast Only, Multicast & Broadcast,

and Multicast & Broadcast & Unknown Unicast.

Threshold (pps): If storm control is enabled (by default it is disabled), the threshold can be set from 0.8 to

12.6Kbits per second at 10Mbps speed, and 8 ~ 126Kbits per second at 100Mbps speed.

Click Apply for the settings to take effect.

DES-1100-26

Figure 66 – QoS > Storm Control

Storm Control Type: Storm type supports Broadcast Only as default.

Threshold (pps): If storm control is enabled (by default it is disabled), the threshold can be set from 0.8 to

12.6Kbits per second at 10Mbps speed, and 8 ~ 126Kbits per second at 100Mbps speed, and 80 ~

1260Kbits per second at 1000Mbps speed.

Click Apply for the settings to take effect.

NOTE: DES-1100-16/24 support 3 packet types

of Storm Control, and DES-1100-26 supports

Broadcast Storm Control.

QoS > Bandwidth Control

The Bandwidth Control page allows network managers to define the bandwidth settings for a specified port’s

transmitting and receiving data rates.