User manual

D-Link Web Smart Switch User Manual
Figure 42 – System > Trap Setting
Select the event message(s) to be sent out to the managing station.
System Event: The system level messages contain:
Device Bootup - System boot-up information
Illegal Login - Events of incorrect password logins and records the IP of the source PC
Twisted pair Port Link Up/Link Down: Copper port connection information
Firmware Upgrade State: Information of firmware upgrade - success or failure
DES-1100-26
Figure 43 – System > Trap Setting
Select the event message(s) to be sent out to the managing station.
System Event: The system level messages contain:
Device Bootup - System boot-up information
Illegal Login - Events of incorrect password logins and records the IP of the source PC
Fiber Port Link Up or Link Down: Fiber port connection information
Twisted pair Port Link Up/Link Down: Copper port connection information
Firmware Upgrade State: Information of firmware upgrade - success or failure
NOTE: DES-1100-26 sends trap when Fiber Port
link state changes.
System > Password Access Control
Setting a password is a critical tool for managers to secure the EasySmart Switch. After entering the old
password and the new password two times, click Apply for the changes to take effect.
Figure 44 – System > Password Access Control
L2 Features > Port Trunking
The Trunking function allows the switch to combine two or more ports together to increase bandwidth.
Select the Trunking Groups, choose the Members to be grouped together, and then click Apply to
activate the selected Trunking Groups. Up to two Trunking Groups may be created for DES-1100-
16/24, and up to three Trunking Groups for DES-1100-26, each supporting up to four ports.
Disable - Removes all the members in this trunk group.
2
2
5
5