User manual

D-Link Web Smart Switch User Manual

Figure 39 – System > System Setting

System > Port Settings

In the Port Setting page, the status of all ports can be monitored and adjusted for optimum configuration. By

selecting a range of ports (From Port and To Port), the Speed can be set for all selected ports, effective by

clicking Apply. Press the Refresh button to view the latest information.

DES-1100-16/24

Figure 40 – System > Port Setting

Speed: Copper connections can operate in Forced Mode settings (100M Full, 100M Half, 10M Full, 10M

Half), Auto, or Disabled. The default setting for all ports is Auto.

NOTE: Be sure to adjust port speed settings

appropriately after changing connected cable

media types.

Link Status: Reporting Down indicates the port is disconnected.