User manual

D-Link Web Smart Switch User Manual
20
Figure 32 – Tool Menu > Firmware upgrade
Click Browse to browse your inventories for a saved firmware file. And then click Upgrade to restore the
selected firmware file.
CAUTION: Do not disconnect the PC or remove
the power cord from device until upgrade is
complete. The Switch may crash if the Firmware
Upgrade is incomplete.
Configuration Backup & Restore
Allow the current configuration settings to be saved to a file (not including the password), and if necessary,
you can restore configuration settings from the file.
Figure 33 – Tool Menu > Configure Backup and Restore
Backup or restore the configuration file to or from your local drive.
Click Backup to save the current settings to your disk.
Click Browse to browse your inventories for a saved backup settings file.
Click Restore after selecting the backup settings file you want to restore.
Note: Switch will reboot after restore and
all current configurations will be lost